Connection technology of throat hoop

Features of throat hoop: low worm friction, especially suitable for the connection of vehicle type or anti-corrosion material parts. The throat hoop has a wide range of application, anti torsion and pressure resistance, even torsion torque, firm locking, very tight, and wide range of adjustment. The throat hoop is suitable for fasteners connecting soft and hard pipes over 30mm. The appearance of the assembled throat hoop is particularly beautiful.

For the connection process of throat hoop, the steel pipe shall be cut by the steel pipe cutter according to the required length, the cut shall be flat, and the end face of the cut shall be perpendicular to the axis of the steel pipe. If there is burr at the incision, it should be polished with sandpaper, file or grinder. It is suggested to use the pipe cutter of the threading machine to break the pipe. The advantage is that the end face of the pipe is vertical and flat, and there is little burr. When the conventional toothless saw is used to cut the pipe, it is easy to cause the pipe section dislocation and more burrs due to the factors such as the uneven end face of the saw blade, excessive force, pipe rotation and so on.